Normatives
EN ISO 7396-1 | NF S 90-116 | UNI 9507 | EN ISO 5359 | DIN 13260-2 | BS 5682 | EN ISO 15001
The Area valve to be installed downstream of the line reducers as required by the standard for medical gas systems; a single device that meets all the regulatory indications of EN ISO 7396-1 relating to the Area Valve; consisting of a ball valve, inlet for specific gas maintenance, connection to the system with connection for Ø 16 mm welded pipe, physical disconnection, seat with check valve prepared for the transducer or the pressure switch for the mandatory signaling of pressure maximum and minimum of the line; predisposed for the installation of a proximity sensor, able to indicate the ON / OFF status of the area valve by transmitting the signal to the relative valve status alarm module.
N.One body made of CW617N chemically nickel-plated brass.
N.One Ø 16 mm inlet pipe connector.
N.One Ø 16 mm outlet pipe connector.
N.One inlet shut-off ball valve.
N.One emergency socket.
N.One physical disconnection.
PTFE shut-off valve gaskets.
EPDM PEROX O-Ring.
| CODE | GAS | SOCKET TYPE | Ø INLET - OUTLET | WEIGHT |
| HG170OXAFN | O2 | AFNOR NF S 90-116 | 16 mm - 16 mm | 2,1 kg |
| HG170OXNST | O2 | NIST ISO 18082 | 16 mm - 16 mm | 2,1 kg |
| HG170OXDIN | O2 | DIN 13260-2 | 16 mm - 16 mm | 2,1 kg |
| HG170OXUNI | O2 | UNI 9507 | 16 mm - 16 mm | 2,1 kg |
| HG170NOAFN | N2O | AFNOR NF S 90-116 | 16 mm - 16 mm | 2,1 kg |
| HG170NONST | N2O | NIST ISO 18082 | 16 mm - 16 mm | 2,1 kg |
| HG170NODIN | N2O | DIN 13260-2 | 16 mm - 16 mm | 2,1 kg |
| HG170NOUNI | N2O | UNI 9507 | 16 mm - 16 mm | 2,1 kg |
| HG170A4AFN | Air 400 | AFNOR NF S 90-116 | 16 mm - 16 mm | 2,1 kg |
| HG170A4NST | Air 400 | NIST ISO 18082 | 16 mm - 16 mm | 2,1 kg |
| HG170A4DIN | Air 400 | DIN 13260-2 | 16 mm - 16 mm | 2,1 kg |
| HG170A4UNI | Air 400 | UNI 9507 | 16 mm - 16 mm | 2,1 kg |
| HG170A8AFN | Air 800 | AFNOR NF S 90-116 | 16 mm - 16 mm | 2,1 kg |
| HG170A8UNI | Air 800 | UNI 9507 | 16 mm - 16 mm | 2,1 kg |
| HG170A8NST | Air 800 | NIST ISO 18082 | 16 mm - 16 mm | 2,1 kg |
| HG170CDAFN | CO2 | AFNOR NF S 90-116 | 16 mm - 16 mm | 2,1 kg |
| HG170CDDIN | CO2 | DIN 13260-2 | 16 mm - 16 mm | 2,1 kg |
| HG170CDUNI | CO2 | UNI 9507 | 16 mm - 16 mm | 2,1 kg |
| HG170CDNST | CO2 | NIST ISO 18082 | 16 mm - 16 mm | 2,1 kg |
| HG170N4AFN | N2 | AFNOR NF S 90-116 | 16 mm - 16 mm | 2,1 kg |
| HG170N4UNI | N2 | UNI 9507 | 16 mm - 16 mm | 2,1 kg |
Sede Legale e Produttiva: via Gualco, 4 – Genova
T + 39 010 83 09 103 – F + 39 010 83 09 183
Sede produttiva: via Roma, 181A – 27010 Giussago (PV)
Behringer s.r.l.
Capitale Sociale Euro 102.000 i.v.
R.E.A. 389592 GE
C.F./P.I. 01167840998
Società soggetta ad attività di direzione e coordinamento di SOL S.p.A.
