Normatives
EN ISO 7291 | UNI EN ISO 5171
Manifold, suitable for use with pure gases, with automatic switching and manual reset using the lever on the pressure regulator to restore priority of use of the source. If one of the two sources is discharged, the system is fed automatically from the other source.The module includes two HF-type single-pressure gauge pressure regulators made of CW614N chemically nickel-plated brass, one pressure gauge to show the line pressure, two high pressure shut-off valves and two bleed valves.Inlet connection is threaded G1/4″ M R, outlet connection is G1/4″ F R.Its maximum capacity at 10 bar outlet pressure is 24 Nm³/h, 400 Nl/min.On request the pressure gauge at the pressure regulator’s inlet can have electrical contacts to be connected to a central alarm unit to signal if the manifold is empty.For easy wall mounting, all components are installed on an anodized aluminum plate.A helium leak test at 10-4 mbar l/s can be carried out at the customer’s request.
Two HF regulators with chemically nickel-plated CW614N brass body with adjustable calibration and stainless steel diaphragm.
Adjustment knob, valve knobs and reversing lever made of ABS.
Two overpressure discharge valves, built into the pressure regulators, pre-calibrated and with drain channel, G1/4 "M R.
Two high pressure shut-off valves with stainless steel diaphragm.
Two manifold overpressure discharge valves with stainless steel diaphragm, G1/4" F R.
Two high pressure gauges with range according to the gas used, class 2.5.
One low pressure gauge with range according to the gas used, class 2.5.
Two check valves on outlets of pressure regulators.
Two anti-siphoning valves on inlets of high pressure shut-off valves.
Stainless steel springs.
Teflon sealing seat on regulator, nylon 6.6 valve seal seat.
NBR o-ring.
Anodized aluminum wall mount support.
| CODE | DESCRIPTION |
| HK138 | MAINTENANCE EQ HF H.P. PURE GASES |
| CODE | Q max. | P1 max. | P2 max. | PRESSURE GAUGE RANGE | WIDTH | HEIGHT | DEPTH | WEIGHT |
| HQG001 | 24 Nm³/h | 200 bar - 50 bar N2O, CO2 | 10 bar | 0-315 bar / 0-16 bar | 440 mm | 190 mm | 170 mm | 5,8 kg |
| HQG001A | 4 Nm³/h | 25 bar | 1,2 bar | 0-40 bar / 0-2,5 bar | 440 mm | 190 mm | 170 mm | 5,8 kg |
| HQG001B | 24 Nm³/h | 200 bar | 10 bar | 0-315 bar / 0-16 bar contact type | 440 mm | 190 mm | 170 mm | 5,8 kg |
| HQG001P | 6 Nm³/h | 15 bar | 2 bar | 0-16 bar / 0-2,5 bar | 440 mm | 190 mm | 170 mm | 5,8 kg |
Sede Legale e Produttiva: via Gualco, 4 – Genova
T + 39 010 83 09 103 – F + 39 010 83 09 183
Sede produttiva: via Roma, 181A – 27010 Giussago (PV)
Behringer s.r.l.
Capitale Sociale Euro 102.000 i.v.
R.E.A. 389592 GE
C.F./P.I. 01167840998
Società soggetta ad attività di direzione e coordinamento di SOL S.p.A.
